Water Treatment for Safety Showers and Eye Wash Units

 

Oxysafe Range

Oxysafe is a 21st Century new generation ecological multipurpose disinfectant.  This is made up from Hydrogen Peroxide and a silver salt which are highly effective at removing biofilm and controlling Legionella.  The silver breaks down the wall of the cell; the peroxide then kills the bacteria, making it superior to chlorine based technology and presents none of the hazards. Also, chlorine is bound by caustic soda and creates biofilm which can become a breeding ground for bacteria. HSE guidelines state: ‘where available safer products must be used’.

Benefits and Standards:
Leaves no residual 
Odourless and tasteless
Bio-degradable
Meets BS EN ISO Standards
Manufactured under EC Directives

Applications:
Broad-spectrum disinfectant
Biofilm remover
Bacterial and virucidal agent
Effective in the control of Legionella

As part of the Hughes Safety Showers continuous improvement program we have introduced new measures in both the manufacture and servicing of our Safety Showers to control the growth and spread of bacteria. Our Oxysafe range and Test Strips provide a simple and safe protocol to maintain and monitor the water quality within the Tank Showers between service periods as part of your required Legionella control.

Our standard ready to use Oxysafe range:

350 Litre Tank Shower   1 litre Oxysafe 

750 Litre Tank Shower   1 litre Oxysafe 

1200 Litre Tank Shower 1 litre Oxysafe 

Hughes Safety Showers Oxysafe strength Test Strips - pack of 50

 

 

Clinicoat SD/UA

Hughes can now offer an antimicrobial CliniCoat UA coating to almost any surface using our Ultrasonic Atomizer or other Hughes applicators. Once applied, CliniCoat UA forms a permanent bond to the surface to protect against bacteria, virus and fungus. Treated surfaces do not require constant re-application, however they should be regularly cleaned using our approved protocols  (Hughes Emergency or Service to advise).

Benefits and Standards:
Can be retrofitted to any surfaces 
Odorless
Non-leaching can be used on food preparation surfaces
Meets BS EN ISO Standards
Manufactured under EC Directives
Strong chemical bonding process

Applications:
Sustained antimicrobial performance
Mould remediation
Effective protective coating to most surfaces against fungus

As part of the Hughes Safety Showers continuous improvement program we have introduced new measures in both the manufacture and servicing of our Safety Showers to control the growth and spread of bacteria. CliniCoat UA can be applied to new or used equipment as part of our hygiene and infection control protocols. When Clinicoat is applied to a surface it forms a Self-Sanitizing Treatment (SST).

Our standard ready to use product is CliniCoat SD/UA

Our Technical Sales Team and Service Engineers can advise and provide ready to use treatments and testing procedures for your Tanks and Safety Showers as part of COSHH regulations.

Note: For advice on your requirements this would be included as part of your Service Contract or Engineers report (see Hughes Safety Showers Service details).